Technical Data Sheet

The Technical Data Sheets are part of the technical documentation according to the Construction Products Regulation

 

Machine gypsum plasters

MP 100 leicht
Machine gypsum plaster EN 13279-1, B4/50/2 Premium machine plaster with light additives
MP 103 L KalkGips plus
Machine gypsum plaster EN 13279-1, B6/50/2
With construction lime and light additives
MP Classic
Maschinenputz DIN EN 13279-1, B1/50/2
Classical gypsum dry mortar
MP Classic D6
Machine gyspum plaster EN 13279-1, B7/50/6
Compressive strength more than 6 N/mm², ideal for surfaces subject to mechanical stresses
MP AquaProtect® – water-repellent
Machine gypsum plasters EN 13279-1, B4/50/2, water-repellent
Compressive strength more than 3.5 N/mm², ideal as a bonding substrate for tiles

 
 

Hand gypsum plasters

RotWeiss leicht 120F
Hand gypsum plaster EN 13279-1, B4/20/2 (also suitable for mechanical application)
Ideal for modernisation. Particularly light and efficient
RotWeiss 100
Hand gypsum plaster EN 13279-1, B4/20/2
For smooth substrates such as concrete
Setting time approx. 1.5 hours
For creating a single smooth layer of plaster on walls and ceilings within buildings

 
 

Fillers/smoothing compounds

CasoFill® Super 50
Filler/smoothing compound EN 13963 Type 3B/4B
For filling gypsum board joints (with and without reinforcing strips)

 
 

Substrate pre-treatment

Betonkontakt
Organic bonding agent for gypsum interior plaster conform to EN 13914-2 and DIN 18550-2. Before applying gypsum plasters and gypsum-based plasters to concrete (residual moisture ≤ 3 % by mass) indoors
Grundiermittel
Primer conform to EN 13914-2 and DIN 18550-2. Reducing/evening of the absorption properties of plaster substrates on unevenly or highly-absorbent plaster substrates
Aufbrennsperre
Primer conform to EN 13914-2 and DIN 18550-2. Reducing/evening of the absorption properties of plaster substrates on unevenly or highly-absorbent plaster substrates